Lenovo IdeaPad S10e und Linux

Vor ein paar Tagen hat sich ein Arbeitskollege ein Netbook zugelegt – namentlich das Lenovo Ideapad S10e NS84XGE in schwarz.

Der Adminblogger musste bei der erstbesten Gelegenheit natürlich sofort grml-medium 2008.11 vom USB-Stick booten um sich das Innenleben etwas genauer ansehen zu können.

Das Netbook verfügt über ein Splashtop-Image (Pressemitteilung DeviceVM and Lenovo Bring Splashtop to Netbooks), welches bereits wenige Sekunden nach dem Einschalten des Geräts einen abgespeckten Linux-Desktop mit Applikationen wie Firefox & Skype bereitstellt.

Nun aber zu den interessanten Dingen für Linux-User:

# lspci

00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
05:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)

# fdisk -l

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xe41dfeb7

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1       19008   152679424    7  HPFS/NTFS
/dev/sda2           19008       19458     3608576   27  Unknown

# lsmod

Module                  Size  Used by
ipv6                  231228  10
cpufreq_ondemand        8076  2
acpi_cpufreq            8588  0
freq_table              5312  2 cpufreq_ondemand,acpi_cpufreq
af_packet              16384  2
wmi                     7592  0
sbs                    13064  0
sbshc                   6656  1 sbs
container               5376  0
fuse                   45468  0
i2c_i801                9488  0
uvcvideo               48136  0
compat_ioctl32          3072  1 uvcvideo
i2c_core               18580  1 i2c_i801
rtc_cmos               10400  0
videodev               27904  1 uvcvideo
rtc_core               15644  1 rtc_cmos
iTCO_wdt               11556  0
rtc_lib                 4352  1 rtc_core
pcspkr                  4224  0
iTCO_vendor_support     4868  1 iTCO_wdt
v4l1_compat            13828  2 uvcvideo,videodev
video                  18192  0
evdev                   9984  0
joydev                 10560  0
output                  4608  1 video
ac                      6020  0
snd_hda_intel         321180  0
battery                12164  0
button                  7952  0
snd_pcm                59396  1 snd_hda_intel
snd_seq                42816  0
snd_timer              18696  2 snd_pcm,snd_seq
snd_seq_device          7692  1 snd_seq
snd                    44344  5 snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device
hci_usb                14364  0
bluetooth              44900  1 hci_usb
soundcore               7496  1 snd
snd_page_alloc          9096  2 snd_hda_intel,snd_pcm
intel_agp              23868  1
loop                   14988  2
aufs                  112376  1
exportfs                5760  1 aufs
usb_storage            63752  1
nls_iso8859_1           5888  1
nls_cp437               7424  1
ntfs                  217140  0
libusual               19860  1 usb_storage
ehci_hcd               30220  0
uhci_hcd               20880  0
tg3                   102532  0
usbcore               113744  7 uvcvideo,hci_usb,usb_storage,libusual,ehci_hcd,uhci_hcd
thermal                16924  0
processor              34860  4 acpi_cpufreq,thermal
fan                     6020  0
squashfs               33924  1
sqlzma                  4612  1 squashfs
unlzma                  6656  1 sqlzma

# dmesg

Linux version 2.6.26-grml (mika@grmlvrs) (gcc version 4.3.2 (Debian 4.3.2-1) ) #1 SMP PREEMPT Wed Nov 26 21:41:43 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 – 000000000009f800 (usable)
BIOS-e820: 000000000009f800 – 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 – 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 – 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 – 000000007f6d0000 (usable)
BIOS-e820: 000000007f6d0000 – 000000007f6e2000 (ACPI data)
BIOS-e820: 000000007f6e2000 – 000000007f6e3000 (ACPI NVS)
BIOS-e820: 000000007f6e3000 – 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 – 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 – 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 – 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 – 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 – 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 – 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 – 0000000100000000 (reserved)
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
1142MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at [c00f7b80] 000f7b80
Entering add_active_range(0, 0, 521936) 0 entries of 256 used
Zone PFN ranges:
DMA             0 ->     4096
Normal       4096 ->   229376
HighMem    229376 ->   521936
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0:        0 ->   521936
On node 0 totalpages: 521936
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2286 pages used for memmap
HighMem zone: 290274 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.5 present.
ACPI: RSDP 000F7A70, 0024 (r2 PTLTD )
ACPI: XSDT 7F6DB7B5, 0084 (r1 PTLTD   XSDT    6040000  LTP        0)
ACPI: FACP 7F6E1CE5, 00F4 (r3 INTEL  CALISTGA  6040000 ALAN        1)
ACPI: DSDT 7F6DC9B7, 52BA (r1 INTEL  CALISTGA  6040000 INTL 20061109)
ACPI: FACS 7F6E2FC0, 0040
ACPI: APIC 7F6E1DD9, 0068 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
ACPI: HPET 7F6E1E41, 0038 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
ACPI: MCFG 7F6E1E79, 003C (r1 INTEL  CALISTGA  6040000 LOHR       5A)
ACPI: TCPA 7F6E1EB5, 0032 (r1 PTLTD  CALISTGA  6040000  PTL        1)
ACPI: TMOR 7F6E1EE7, 0026 (r1 PTLTD            6040000 PTL         3)
ACPI: APIC 7F6E1F0D, 0068 (r1 PTLTD   APIC    6040000  LTP        0)
ACPI: BOOT 7F6E1F75, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: ASF! 7F6E1F9D, 0063 (r16   CETP     CETP  6040000 PTL         1)
ACPI: SSDT 7F6DBDD5, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
ACPI: SSDT 7F6DBD2F, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)
ACPI: SSDT 7F6DB839, 04F6 (r2  PmRef    CpuPm     3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If “acpi_apic_instance=2” works better, notify linux-acpi@vger.kernel.org
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
PM: Registered nosave memory: 000000000009f000 – 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 – 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 – 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 – 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 – 0000000000100000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 41000 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 2
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517858
Kernel command line: apm=power-off lang=de vga=791 quiet boot=live nomce live-media-path=/boot
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore… done.
Enabling unmasked SIMD FPU exception support… done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Detected 1596.065 MHz processor.
Console: colour VGA+ 80×25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2056428k/2087744k available (3180k kernel code, 30152k reserved, 1424k data, 384k init, 1170240k highmem)
virtual kernel memory layout:
fixmap  : 0xffee3000 – 0xfffff000   (1136 kB)
pkmap   : 0xff800000 – 0xffc00000   (4096 kB)
vmalloc : 0xf8800000 – 0xff7fe000   ( 111 MB)
lowmem  : 0xc0000000 – 0xf8000000   ( 896 MB)
.init : 0xc0586000 – 0xc05e6000   ( 384 kB)
.data : 0xc041b15e – 0xc057f228   (1424 kB)
.text : 0xc0100000 – 0xc041b15e   (3180 kB)
Checking if this processor honours the WP bit even in supervisor mode…Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 3197.07 BogoMIPS (lpj=5326519)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
using mwait in idle threads.
Checking ‘hlt’ instruction… OK.
ACPI: Core revision 20080321
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3193.98 BogoMIPS (lpj=5319980)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6390.06 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1
groups: 0 1
domain 1: span 0-1
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1
groups: 1 0
domain 1: span 0-1
groups: 0-1
net_namespace: 660 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
No dock devices found.
EISA bus registered
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 – 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: LENOVO
ACPI: DMI Product Name: 40684WG
ACPI: DMI Product Version: Lenovo
ACPI: DMI Board Name: Kuril
ACPI: DMI BIOS Vendor: LENOVO
ACPI: DMI BIOS Date: 11/14/2008
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: If “acpi_osi=Linux” works better, please notify linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE storm detected, disabling EC GPE
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge – 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved
system 00:05: ioport range 0x800-0x80f has been reserved
system 00:05: ioport range 0x1000-0x107f has been reserved
system 00:05: ioport range 0x1180-0x11bf has been reserved
system 00:05: ioport range 0x1640-0x164f has been reserved
system 00:05: ioport range 0xfe00-0xfe00 has been reserved
system 00:05: ioport range 0x380-0x384 has been reserved
system 00:05: ioport range 0x386-0x387 has been reserved
system 00:06: ioport range 0x6a0-0x6af has been reserved
system 00:06: ioport range 0x6b0-0x6ff has been reserved
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: 0xf0200000-0xf02fffff
PREFETCH window: 0x00000000f0000000-0x00000000f00fffff
PCI: Bridge: 0000:00:1c.1
IO window: 3000-3fff
MEM window: 0xf0300000-0xf03fffff
PREFETCH window: 0x00000000f0100000-0x00000000f01fffff
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: 0xf0400000-0xf04fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs…<7>Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
it is
Freeing initrd memory: 7362k freed
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x36 set to 0x1
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 1746
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
isapnp: Scanning for PnP cards…
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
brd: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Driver ‘sd’ needs updating – please use bus_type methods
Driver ‘sr’ needs updating – please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata2: port disabled. ignoring.
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 — — ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19
ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19
ata3.00: ATA-8: WDC WD1600BEVS-08VAT1, 13.01A13, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600BEVS-0 13.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Failed to disable AUX port, but continuing anyway… Is this a SiS?
If AUX port is really absent please use the ‘i8042.noaux’ option.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 15
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 384k freed
Write protecting the kernel text: 3184k
Write protecting the kernel read-only data: 1180k
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
ACPI: SSDT 7F6DC69E, 0245 (r2  PmRef  Cpu0Ist     3000 INTL 20050624)
ACPI: SSDT 7F6DC034, 05E5 (r2  PmRef  Cpu0Cst     3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7F6DC8E3, 00D4 (r2  PmRef  Cpu1Ist     3000 INTL 20050624)
ACPI: SSDT 7F6DC619, 0085 (r2  PmRef  Cpu1Cst     3000 INTL 20050624)
Marking TSC unstable due to: TSC halts in idle.
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (42 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
tg3.c:v3.92.1 (June 9, 2008)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
USB Universal Host Controller Interface driver v3.0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:23:8b:27:22:27
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.26-grml uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0844000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26-grml ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26-grml uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26-grml uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.26-grml uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb 2-1: new high speed USB device using ehci_hcd and address 2
Clocksource tsc unstable (delta = -275755559 ns)
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=054c, idProduct=02a5
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Storage Media
usb 2-1: Manufacturer: Sony
usb 2-1: SerialNumber: AC2006080300059
NTFS driver 2.1.29 [Flags: R/W DEBUG MODULE].
usb 2-3: new high speed USB device using ehci_hcd and address 3
NTFS volume version 3.1.
usb 2-3: configuration #1 chosen from 1 choice
usb 2-3: New USB device found, idVendor=5986, idProduct=0241
usb 2-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 2-3: Product: Lenovo EasyCamera
usb 2-3: Manufacturer: BISON Corporation
usb 2-5: new high speed USB device using ehci_hcd and address 5
usb 2-5: configuration #1 chosen from 1 choice
usb 2-5: New USB device found, idVendor=0bda, idProduct=0158
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-5: Product: USB2.0-CRW
usb 2-5: Manufacturer: Generic
usb 2-5: SerialNumber: 20071114173400000
usb 3-2: new full speed USB device using uhci_hcd and address 2
NTFS volume version 3.1.
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: New USB device found, idVendor=0a5c, idProduct=2150
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: BCM2046 Bluetooth Device
usb 3-2: Manufacturer: Broadcom Corp
usb 3-2: SerialNumber: 002269F49B7C
usbcore: registered new interface driver libusual
Initializing USB Mass Storage driver…
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi5 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
scsi 4:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: [sdb] 4062208 512-byte hardware sectors (2080 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
scsi 5:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: [sdc] Attached SCSI removable disk
usb-storage: device scan complete
sd 4:0:0:0: [sdb] 4062208 512-byte hardware sectors (2080 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
usb-storage: device scan complete
NTFS volume version 3.1.
aufs 20080714
loop: module loaded
aufs test_add:367:exe[1945]: uid/gid/perm //grml-medium.squashfs 0/0/0777, 0/0/0755
udevd version 125 started
agpgart: Detected an Intel 945GME Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
ACPI: Battery Slot [BAT0] (battery present)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC269, trying auto-probe from BIOS…
ACPI: AC Adapter [ACAD] (off-line)
intel_rng: FWH not detected
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
iTCO_vendor_support: vendor-support=0
input: PC Speaker as /devices/platform/pcspkr/input/input7
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Linux video capture interface: v2.00
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0241)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input8
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
fuse init (API version 7.9)
ACPI: WMI: Mapper loaded
NET: Registered protocol family 17
NET: Registered protocol family 10
lo: Disabled Privacy Extensions

Comments ( 7 )

  1. el*Loco
    Weisst du, ob das broadcom WLAN device vom b43 treiber unterstützt wird oder ob das wieder nur per ndiswrapper geht?
  2. Marcel
    Ich weiß es bisher nicht. Genaueres kann ich Dir vermutlich nächste Woche sagen - denn ich hab mir jetzt auch das S10e bestellt ... der Spieltrieb hat gesiegt :) Gruß, Marcel.
  3. Marcel
    Sooo, das WLAN-Device funktioniert nicht mit b43, dafür aber mit dem Treiber von Broadcom selbst. Eine Anleitung dazu gibt es hier: http://jomcode.com/fadhil/?p=59 Ich werde heute Abend noch etwas dazu bloggen. Gruß, Marcel.
  4. adminblogger.de : Broadcom Corporation BCM4312 802.11b/g [14e4:4315]
    [...] der Adminblogger auch eines dieser neumodischen Netbooks zulegen - die Entscheidung fiel auf ein Lenovo IdeaPad S10e, welches ich bereits vor einigen Tagen bei einem Arbeitskollegen begutachten [...]
  5. Gerald
    Hallo Marcel, eine Frage: Weißt du, ob die man die Festplatte in der Version mit Solid State Disks einfach gegen eine normale 2,5" Festplatte austauschen kann? Gruß, Gerald
  6. Marcel
    Ich weiß es nicht, da ich kein Ideapad mit SSD habe. Aber es sollte sich um eine SSD mit standardisiertem Interface handeln, also SATA oder IDE. Die wird garantiert nicht mit dem Mainboard verlötet sein :) Gruß, Marcel.
  7. Gerald
    Ok, mit dem standardiesiertem Interface habe ich schon gerechnet, allerdings wäre es eine blöde Überraschung, wenn 1,8" SSDs verbaut werden und man in die Halterung 2,5" einfach nicht reinbekommt (auch wenn es unwahrscheinlich ist).